OATEY CO -- 95/5 SOLID WIRE SOLDER, 53027  -- 3439-00N073646
<pre>=====================  Product Identification  =====================

Product ID:95/5 SOLID WIRE SOLDER, 53027
MSDS Date:01/01/1996
FSC:3439
NIIN:00N073646
=== Responsible Party ===
Company Name:OATEY CO
Address:4700 WEST 160TH ST
Box:35096
City:CLEVELAND
State:OH
ZIP:44135
Country:US
Info Phone Num:216-267-7100
Emergency Phone Num:303-623-5716
CAGE:53472
=== Contractor Identification ===
Company Name:OATEY CO
Address:4700 WEST 160TH STREET
Box:35906
City:CLEVELAND
State:OH
ZIP:44135
Country:US
Phone:216-267-7100/303-623-5716
CAGE:53472

=============  Composition/Information on Ingredients  =============

Ingred Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: 95%
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3

Ingred Name:ANTIMONY (SARA 313) (CERCLA)
CAS:7440-36-0
RTECS #:CC4025000
Fraction by Wt: 5%
OSHA PEL:0.5 MG/M3
ACGIH TLV:0.5 MG/M3 (SB)
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IF HEATED, FUMES MAY
    PRODUCE RESPIRATORY IRRITATION, FEVER, CHILLS, MUSCULAR PAIN,
    VOMITING AND SWEATING. SKIN: FUMES MAY CAUSE IRRITATION. EYES:
    FUMES MAY CAUSE IRRITATION. INGESTION: MAY	CAUSE ABDOMINAL PAIN,
    GASTROINTESTINITIS, INTERNAL CUTS OR OBSTRUCTIONS. TARGET ORGANS:
    LUNG, SKIN, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: EYE, IRRITANT BY HEATED FUMES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN: IF IRRIT ARISES, WASH THOROUGHLY W/SOAP & WATER. SEEK
    MED ATTN IF IRRIT PERSISTS. EYES: IF FUMES CAUSE IRRIT, MOVE TO
    FRESH AIR & IRRIGATE EYES W/WATER FOR AT LEAST 15 MIN. IF IRRIT
    PERSISTS, SE EK MED ATTN. IF EYE IS STRUCK W/WIRE, SEEK MED ATTN.
    INHAL: MOVE TO FRESH AIR. IF BRTHG IS DFCLT, GIVE OXYGEN. IF NOT
    BRTHG, GIVE ARTF RESP. KEEP VICTIM QUIET & WARM. CALL POIS CTL CTR
    OR MD (SUPDAT)

=====================  Fire Fighting Measures  =====================

Extinguishing Media:SM FIRES: USE DRY CHEM, CARBON DIOIXDE, WATER OR
    FOAM EXTING. LG FIRES: EVACUATE AREA & CALL FIRE DEPARTMENT IMMED.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PLACE MATERIAL IN A CLOSED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PRACTICE GOOD PERSONAL HYGIENE AND
    HOUSEKEEPING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR FOR TOXIC DUST/FUMES.
Ventilation:GENERAL MECHANICAL: NECESSARY IF SOLDERING IN
    NON-VENTILATED AREA. LOCAL EXHAUST: OPEN DOORS & WINDOWS TO REMOVE
    FUMES.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:PRACTICE GOOD PERSONAL HYGIENE AND
    HOUSEKEEPING.
Supplemental Safety and Health
FIRST AID PROC: IMMED. INGEST: DRINK WATER & CALL POIS CTL CTR OR MD
    IMMED. AVOID ALCOHOLIC BEVERAGES. NEVER GIVE ANYTHING BY MOUTH TO
    AN UNCON PERSON.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:>450F,>232C
Spec Gravity:9-11
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY WIRE METAL; NO ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:LEAD FUMES ABOVE MELTING POINT.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ACCORDING TO LOCAL, STATE AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.